Denon AVR-791 Owners Manual - English - Page 54

Simple version Basic version Manual EQ Use the graphic equalizer to adjust the tone of each speaker. "Manual EQ" can be set when "MultEQ®" setting (vpage 49) is "Manual". Setting items Setting details Adjust CH Correct the tone of each speaker. q Select the speaker tone adjustment method. All CH : Adjust the tone of all speakers together. L/R CH : Adjust the tone of left and right speakers together. Each CH : Adjust the tone of each speaker. w Select the speaker. e Select the adjustment frequency band. 63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz • Select the speakers you want to adjust when "L/R" or "Each" is selected. r Adjust the level. -20.0dB - +6.0dB (0.0dB) Base Curve Copy Yes : Copy. Copy "Audyssey Flat" curve No : Do not copy. from MultEQ. "Base Curve Copy" is displayed after Audyssey Auto Setup has been performed. Default The "Manual EQ" settings are returned to the default settings. No : Do not reset to the defaults. Yes : Reset to the defaults. ENGLISH Audio Adjust RESTORER Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals. Setting details OFF : Do not use RESTORER. Mode 1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs. Mode 2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources. Mode 3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs. • This item can be set with analog signals or when a PCM signal (fs = 44.1/48 kHz) is input. • This cannot be set when the surround mode is set to "DIRECT" or "PURE DIRECT". • This item default setting for "iPod" and "USB/iPod" is "Mode 3". All others are set to "OFF". • When set to something other than "OFF", is displayed. • Pressing RESTORER on the remote control unit or the main unit makes this setting. OFF Mode 1 Mode 2 (RESTORER 64) (RESTORER 96) Mode 3 (RESTORER HQ) Audio Delay Default settings are underlined. While viewing video, manually adjust the time to delay audio output. 0ms - 200ms Setting details • This item can be set within the range of 0 to 100 ms when "Auto Lip Sync" is set to "ON" and when a TV compatible with Auto Lip Sync is connected. • Store "Audio Delay" for each input source. • Audio Delay for game mode can be set when "Video Mode" (vpage 45) is set to "Game". Advanced version Information Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu 51