Denon AVR-791 Owners Manual - English - Page 63

ENGLISH Operating the connected devices by remote control unit Registering the supplied preset codes in the remote control unit enables you to operate devices made by other manufacturers. Operating AV equipment 1 Press ZONE SELECT to select a zone for operation. The zone mode indicator corresponding to the operating zone lights. • The mode switches each time ZONE SELECT is pressed. MAIN ZONE2 ZONE3 Select for the operations in MAIN ZONE. Select for the operations in ZONE2. Not used. • If setting of "Specifying the zone used with the remote control unit" (vpage 63) is "2", operations in MAIN ZONE and ZONE2 are enabled. 2 Press the input source select button (vpage 20). • The input source for the zone selected in step 1 is switched. • The operation mode of the remote control unit is switched as shown in the table. 60 Input source select buttons Input source of this unit Devices controllable with the remote control unit (Operation mode) - This unit (amplifier operation) z BD Device registered on the BD button z DVD Device registered on the DVD button z TV Device registered on the TV button z SAT/CBL Device registered on the SAT/CBL button z GAME Device registered on the GAME button z V.AUX Device registered on the V.AUX button z CD Device registered on the CD button TUNER Radio of this unit USB/iPod USB/iPod or DOCK iPod or USB memory device connected to the USB port iPod connected to the USB port or control dock for iPod. DOCK Control dock for iPod zz If a preset code is registered for this button, the remote control unit of this unit can control another devices. NOTE If the mode of the remote control unit is set to other than ampoperation mode, press AMP to switch the remote control unit to the amp-operation mode to perform the following operations: • For menu operation by pressing MENU • For setting the channel level of the unit by pressing CH LEVEL • For turning power in each zone on or off by pressing ZONE/DEVICE ON or ZONE/DEVICE OFF. 3 Operate this unit or the device whose input source is switched. • For details, refer to the operating instructions for each device. For operations of iPod, TUNER, and USB, see the following pages. • iPod (vpage 22, 23) • TUNER (vpage 24) • USB memory device (vpage 25) Registering preset codes When preset codes are registered in the included remote control unit, it can then be used to operate any devices you have, such as DVD players or TVs made by different manufacturers. In this menu, you can search and display the preset codes that can be preset in the included remote control unit. nnButtons used for operating the devices q ZONE/DEVICE ON, ZONE/DEVICE OFF For switching power of each device on or off. w uio p, ENTER, RETURN For menu operation of each device. e MENU, SETUP, TOP MENU For displaying the menu of each device. r 1, 2, 3, 6, 7, 8, 9 t Number button (0 - 9, +10) y CH +, CH - u TV POWER, TV INPUT For operating a TV This button is enabled in any mode. For details on operation with the remote control unit, see pages 22 to 25, 62, and 63. nnDefault settings for preset codes The devices shown below are registered for each input source button as default. Settings can be changed according to the devices to be used. Input source select buttons Category Brand Preset code Blu-ray Disc player DENON 32258 DVD player DENON 32134 Television SONY 10810 Satellite set top box DirecTV 01377 Cable set top box Motorola 01376 DVD player DENON 32134 CD player DENON z Control dock for iPod DENON 42867 42517 zzIf a control dock for iPod is not to be used, the preset code for another device can be set to DOCK. NOTE • The preset code cannot be registered to TUNER or NET/USB. • Do not register the preset code to iPod. This button also functions as the Play button for an iPod.