Denon AVR-791 Owners Manual - English - Page 55

ENGLISH Manual Setup Set when changing Audyssey® Auto Setup settings, or when changing the audio, video, display or other settings. • If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to set MultEQ®, Dynamic EQ® and Dynamic Volume™ (vpage 49, 50). • Can be used without changing the settings. Please set if necessary. Menu operation 1 Press ZONE SELECT to switch the zone mode to "MAIN". The "MAIN" indicator lights. 2 Press AMP to set the remote control unit to amplifier operation mode. 3 Press MENU. The menu is displayed on the TV screen. 4 Press ui to select the menu to be set or operated. 5 Press ENTER to enter the setting. • To return to the previous item, press RETURN. • Exiting the Menu, press MENU while the menu is displayed. The menu display disappears. Items that can be set with the Manual Setup procedure Speaker Setup (vpage 52) HDMI Setup (vpage 55) Audio Setup (vpage 55) 4-1.Speaker Setup 4-2.HDMI Setup 4-3.Audio Setup 1.Amp Assign 2.Speaker Config. 3.Bass Setting 4.Distance 5.Channel Level 6.Crossover Freq. Auto Lipsync : ON HDMI Audio Out : Amp HDMI Control : OFF 1.2ch Direct/Stereo 2.Auto Surround Mode 3.EQ Customize [ENT]:Select [RTN]:Back ZONE2 Setup (vpage 56) 4-4.ZONE2 Setup Level Lch : 0dB Level Rch : 0dB Vol.limit : OFF Power On Lev: Last Mute Lev. : Full [RTN]:Back [RTN]:Back [ENT]:Select [RTN]:Back Option Setup (vpage 57) 4-5.Option Setup 1.Volume Control 2.Source Delete 3.On-Screen Display 4.Remote Preset Codes 5.Quick Select Name 6.ZONE Rename 7.Display [ENT]:Select [RTN]:Back Speaker Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup. • If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select MultEQ, Dynamic EQ and Dynamic Volume (vpage 49, 50). • Manual Setup can be used without changing the settings. Please set if necessary. Setting items Setting details Amp Assign Set the speakers connected to this unit. Normal : Set when using 7.1-channel (Front/Center/Surround/Surround Back/Subwoofer) speakers. ZONE2 : Set for connecting the speakers for ZONE2 to the SURR. BACK/ AMP ASSIGN terminals. Front Height : Set for connecting the front height speakers to the SURR. BACK/AMP ASSIGN terminals. Front Bi-Amp : Set for connecting a tweeter of a front speaker to the SURR. BACK/AMP ASSIGN terminals and a woofer of the front speaker to the FRONT terminals. Front B : Set for connecting the second front speakers to the SURR. BACK/AMP ASSIGN terminals. In this case, make settings for "Front Speaker Setup" (vpage 54). Speaker Config. Front : Set the front speaker size. Select speaker configuration • Large : Use a large speaker that can adequately play back low and size (bass reproduction frequencies. capability). • Small : Use a small speaker that has inadequate playback capacity for NOTE low frequencies. Do not use the outward shape of the speaker to • When "Subwoofer" is set to "No", "Front" is automatically set to determine selection of a "Large". "Large" or "Small" speaker. • When "Front" is set to "Small", "Center", "Surround", "Surround Instead, use the frequencies Back" and "Front Height" can not be set to "Large". set in "Crossover Center : Set the presence and size of the center speaker. Frequency" (vpage 54) as • Large : Use a large speaker that can adequately play back low the standard for determining frequencies. bass reproduction capability. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when a center speaker is not connected. "Large" is not displayed when "Front" is set to "Small". Subwoofer : Set the presence of a subwoofer. • Yes : Use a subwoofer. • No : Select when a subwoofer is not connected. When "Front" is set to "Small", "Subwoofer" is automatically set to "Yes". 52 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu