Denon AVR-791 Owners Manual - English - Page 60

Simple version Basic version Option Setup Default settings are underlined. Make various other settings. Setting items Volume Control Set the MAIN ZONE (room where the unit is located) volume setting. Source Delete Remove from the display input sources that are not used. Setting details Volume Display : Set how volume is displayed. • Relative : Display ---dB (Min), in the range -80.5 dB - 18 dB. • Absolute : Display in the range 0 (Min) - 99. • The "Volume Display" setting is applied also to the "Volume Limit" and "Power On Level" display method. • The "Volume Display" setting applies to all zones. Volume Limit : Make a setting for maximum volume. • OFF : Do not set a maximum volume. • -20dB (61) / -10dB (71) / 0dB (81) Power On Level : Define the volume setting that is active when the power is turned on. • Last : Use the memorized setting from the last session 0) : Always use the muting on condition when power is turned on. • -80dB - 18dB (1 - 99) : The volume is adjusted to the set level. Mute Level : Set the amount of attenuation when muting is on. • Full : The sound is muted entirely. • -40dB : The sound is attenuated by 40 dB down. • -20dB : The sound is attenuated by 20 dB down. BD / DVD / TV / SAT/CBL / V.AUX / GAME / DOCK / USB/iPod / TUNER / CD : Select input source that is not used. • ON : Use this source. • Delete : Do not use this source. NOTE • Input sources being used in the various zones cannot be deleted. • Input sources set to "Delete" cannot be selected using SOURCE SELECT. On-Screen Display Make the settings related to displays on the TV screen. Screensaver : Make screensaver settings. • ON : The screen saver is activated during menu display, iPod, USB/iPod or TUNER screen display if no operation is performed for an approximately 3-minute continuous period. When you press uio p, the screensaver is cancelled and the screen before that screen saver started is displayed. • OFF : Screensaver is not activated. Text : Display the details of operation when switching surround mode, input mode, etc. • ON : Turn display on. • OFF : Turn display off. ENGLISH Manual Setup Setting items On-Screen Display (Continued) Setting details Master Volume : Display the master volume during adjustment. • Bottom : Display at the bottom. • Top : Display at the top. • OFF : Turn display off. Remote Preset Codes Search a preset code to register in the remote control unit. Quick Select Name Change the "Quick Select" display title to one you prefer. When the master volume display is hard to see when superimposed on movie subtitles, set to "Top". USB : Set the USB screen display time when the input source is "USB/ iPod". • Always : Show display continuously. • 30sec : Show display for 30 seconds after operation. • 10sec : Show display for 10 seconds after operation. • OFF : Turn display off. iPod : Set the iPod screen display time when the input source is "DOCK" or "USB/iPod". • Always : Show display continuously. • 30sec : Show display for 30 seconds after operation. • 10sec : Show display for 10 seconds after operation. • OFF : Turn display off. TUNER : Set the tuner screen display time when the input source is "TUNER". • Always : Show display continuously. • 30sec : Show display for 30 seconds after operation. • 10sec : Show display for 10 seconds after operation. • OFF : Turn display off. See "Registering preset codes" (vpage 60). Rename Label : Select this to change the displayed name for "Quick Select" shown on the screen, as desired. • Up to 16 characters can be input. • For character input, see page 41. Advanced version Information Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu 57