Epson Artisan 810 Quick Guide - Page 48
Remove the yellow tape from the bottom of the cartridge., on the side.
View all Epson Artisan 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4. Remove the cartridge from the package. Do not touch the green chip on the side. 5. Remove the yellow tape from the bottom of the cartridge. Caution: Do not remove any other labels or seals, or ink will leak. 6. Insert the new cartridge into the holder and push it down until it clicks into place. 7. Close the scanner. Note: If you see a warning message that the cartridge you just replaced is not installed, open the scanner and press down the cartridge securely. 48 Maintaining Your All-in-One
48
Maintaining Your All-in-One
4.
Remove the cartridge from the package. Do not touch the green chip
on the side.
5.
Remove the yellow tape from the bottom of the cartridge.
Caution:
Do not remove any other labels or seals, or ink will leak.
6.
Insert the new cartridge into the holder and push it down until it clicks into
place.
7.
Close the scanner.
Note:
If you see a warning message that the cartridge you just replaced is not installed,
open the scanner and press down the cartridge securely.