Epson BrightLink 1480Fi Installation Guide - Page 100
Making Additional Screen Adjustments, Correcting the Image Shape on a Curved Screen
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
11. Press the [Enter] button on the remote control or control panel to begin the adjustment. Once the adjustment is complete, you can use the Quick Corner setting to make further adjustments. Using the Arc Correction or Point Correction options will reset your previous adjustments. Making Additional Screen Adjustments If possible, avoid adjustments with the Auto Screen Adjustment, Quick Corner, or Keystone functions of the projector. Doing so may result in a reduction in image quality and pen or finger touch calibration. Correcting the Image Shape on a Curved Screen If you are projecting on a curved screen, adjust the Arc Correction setting to correct the image shape. Touch unit installation requires a projection surface that is flat, smooth, and unwarped with no more than 0.2 inch (5 mm) of unevenness in any direction on the screen surface. 1. Press the [Menu] button on the remote control or control panel. BrightLink 1480Fi/1480Fi+/1485Fi/1485Fi+ and PowerLite EB-800F/EB-805F: Remote Control Control Panel BrightLink EB-725Wi/EB-735Fi and PowerLite EB-720/EB-725W/EB-750F/EB-755F: Remote Control Control Panel 2. Select Installation. 3. Select Geometry Correction. 100