Epson BrightLink 1480Fi Installation Guide - Page 56
Adjusting the Image, Turn on the projector, Adjust the focus
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
6 Adjusting the Image To ensure the best image quality, follow the steps below to adjust the projected image. You can also use the Auto Screen Adjustment feature to automatically adjust the image. See page 97 for more information. If possible, avoid adjustments with the Auto Screen Adjustment, Quick Corner, or Keystone functions of the projector. Doing so may result in a reduction in image quality and pen or finger touch calibration. Follow these guidelines for setting up the projector: • Make sure the image is evenly rectangular, without distortion. • Make sure the projector is tilted no more than 3° vertically and horizontally in relation to the projected image. Your remote control or projector control panel may look different from the illustrations in this section, but the instructions are the same except where noted. A Turn on the projector Press the power button on the remote control or the projector. B Adjust the focus 1. Open the cover ( ). 2. Use the focus lever to adjust the focus ( ). BrightLink 1480Fi/1480Fi+/1485Fi/1485Fi+ and PowerLite EB-800F/EB-805F: BrightLink EB-725Wi/EB-735Fi and PowerLite EB-720/EB-725W/EB-750F/EB-755F: 3. After you finish making the adjustment, close the cover. 56