Epson BrightLink 1480Fi Installation Guide - Page 24
Installation worksheet for projecting on a plain wall
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installation worksheet for projecting on a plain wall 11 in. (280 mm)-height of wall plate plus cover Required distance from top of image area to bottom holes of wall plate (c) Distance from top of image area to bottom of Touch Unit (if applicable)- see below Distance from top of image area to temporary wall plate hole (d) Ceiling height Height of image area (h) Diagonal size of image area (S) Width of image area (w) Distance from floor to bottom of image area (f) Distance from top of image area to bottom of Touch Unit (if applicable): BrightLink 1480Fi/1480Fi+/1485Fi/ 0.79 to 2 inches (20 to 50 mm) for 16:6 1485Fi+ (BrightLink 1485Fi/1485Fi+ only) and 21:9 aspect ratios BrightLink EB-735Fi 1.61 to 2 inches (41 to 50 mm) for 16:6 aspect ratio BrightLink EB-725Wi - 0.22 to 2 inches (5.7 to 50 mm) for all other aspect ratios 0.70 to 2 inches (17.7 to 50 mm) for all other aspect ratios 0.54 to 2 inches (13.7 to 50 mm) for all aspect ratios 1. Measure the ceiling height (distance from the floor to the ceiling). _____ 2. Determine the aspect ratio of the board or of the images that will be projected. You may need to consult your IT department for this information. ___ 4:3 XGA ___ 16:10 WXGA/WUXGA ___ 16:9 Widescreen ___ 16:6* ___ 21:9** *BrightLink 1485Fi/1485Fi+/EB-735Fi and PowerLite EB-750F/EB-755F/EB-800F/EB-805F only. **BrightLink 1480Fi/1480Fi+/1485Fi/1485Fi+ and PowerLite EB-800F/EB-805F only. If your desired aspect ratio does not match the native resolution of your product, use the Throw Distance Calculator at www.epson.com/support (U.S.), www.epson.ca/support (Canada), or www.latin.epson.com/support (Latin America) to determine the correct measurements. 3. Using the tables on pages 30 to 32, select the largest image size available for your ceiling height. Image height (h) Image width (w) _____ (h) _____ (w) 4. Determine the desired distance from the floor to the bottom of the image area (f). _____ (f ) The recommended minimum distance is 30 inches (762 mm). Images appearing less than 28 inches (711 mm) from the floor may be obstructed for some viewers. 24