Epson BrightLink 1480Fi Installation Guide - Page 79
Attach labels, Touch Calibration
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
English 9. Touch each of the four yellow circles on the screen and verify that the gray touch indicators appear in the correct position. Finger touch operations may not function correctly if you are wearing bandages, artificial nails, nail polish, or anything else that may obstruct your fingers. If the gray indicators do not appear where you touched the screen, you need to manually adjust the touch unit alignment. Select Up using the control panel or remote control and press [Enter]. Try touching the four dots again and repeat this process until the touch indicators appear in the correct position. 10. Perform touch calibration by pressing Menu on the remote control. On the Installation menu, select Touch Unit, then Touch Calibration. Follow the instructions on the screen. See the online User's Guide for more details on the touch calibration. H Attach labels Attach the labels to the tabs on either side of the touch unit. If the touch unit moves out of position, use the labels to determine where to reposition the touch unit. 79