Epson BrightLink 1480Fi Installation Guide - Page 85
Make sure you use the supplied touch unit connection cable. Operations are
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
English 7. Secure the touch unit to the bracket with the M4 × 25 mm bolts (×2) supplied. Caution When attaching the touch unit to the bracket, be careful not to trap your fingers or any other part of your body between the magnets and the bracket. 8. Re-attach the rubber caps. G Turn on the touch unit 1. Connect the touch unit connection cable that is connected to the projector to the port on the Touch Unit. Make sure you use the supplied touch unit connection cable. Operations are not possible with a commercially available cable. 85
85
English
7.
Secure the touch unit to the bracket with the M4 × 25 mm bolts (×2) supplied.
8.
Re-attach the rubber caps.
G
Turn on the touch unit
1.
Connect the touch unit connection cable that is connected to the projector to the port on the
Touch Unit.
Make sure you use the supplied touch unit connection cable. Operations are not
possible with a commercially available cable.
When attaching the touch unit to the bracket, be careful not to trap your fingers or any other
part of your body between the magnets and the bracket.
Caution