Epson ColorWorks CW-C6500A Technical Reference Guide - External I/O CW-C6000/C - Page 12
Signal, Input, Output, Pulse/Level, Description, H: No warning
View all Epson ColorWorks CW-C6500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Pin Signal 11 Feed *3 12 Pause *3 13 Re-print *3 14 Clogged nozzle check *3 *5 15 Head Cleaning *3 16 Warning *2 17 Error *2 InputOutput *1 Input Input Input Input Input Output Output Pulse/Level Description Level Pulse Pulse Pulse Pulse Level Level Sends an instruction to feed the paper. • When the printer is in the Ready or Pause state, the printer feeds paper if this signal is Low. • For labels, if this signal changes to High while the printer is feeding paper, feeding will stop when the edge of the next label is detected. • For continuous paper, if this signal changes to High while the printer is feeding paper, feeding will stop after the detection time has elapsed. • Signal logic: Low active Sends an instruction to pause the printer. • The printer is paused if a change from High to Low is detected. • While the printer is paused, if a change from High to Low is detected again, the printer will be unpaused. • Signal logic: Low active If the label reprinting function is enabled, an instruction to reprint the label that was last printed is sent from an external device. • The label is reprinted if a change from High to Low is detected. • Signal logic: Low active Sends an instruction to check the head for a clogged nozzle. • The head is checked for a clogged nozzle if a change from High to Low is detected. • Signal logic: Low active Sends an instruction for head cleaning. • The head is cleaned if a change from High to Low is detected. • Signal logic: Low active Indicates whether the printer is in a warning state. • L: Warning • H: No warning Indicates whether the printer is in an error state. • L: Error • H: No error 12