Epson ColorWorks CW-C6500A Technical Reference Guide - External I/O CW-C6000/C - Page 21
Setting Commands, End print signal (output) mode settings
View all Epson ColorWorks CW-C6500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 3 Commands Setting Commands This section describes the commands for setting the external I/O. End print signal (output) mode settings [Format] ^S(CNA,B,c [Parameter] c Description c = Mode setting D/E/N/0/1/2/3/4 Definition range [Function] Configure the mode settings for the end print signal. Value for parameter c Description D/0 Turn the end print signal OFF. (End print signal not output) 1 Set the end print signal (pin 18) as follows: Normal: High, When feeding paper: Low. 3 E/2 Set the end print signal (pin 18) as follows: Normal: Low, When feeding paper: High. 3 Set the end print signal (pin 18) as follows: Normal: High, When continuous printing ends and the printer stops at the predetermined position: Low for 20 msec. N/4 Set the end print signal (pin 18) as follows: Normal: Low, When continuous printing ends and the printer stops at the predetermined position: High for 20 msec. [Initial value] 0 [Signal timing] Signal Sent label format Printer status Processed Standby for label format start signal Print label Data preparation complete Start print End print Ready to print next label Signal status Preparing Preparation complete Do not start Start Not finished Finished 21