Epson ColorWorks CW-C6500A Technical Reference Guide - External I/O CW-C6000/C - Page 62
Perform jumper settings. Pull out the connector jumper pin and insert it into
View all Epson ColorWorks CW-C6500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
6 Perform jumper settings. Pull out the connector jumper pin and insert it into the number to be set. Press with your fingers on the right side of the interface board to affix it while pulling and inserting the jumper pin. CN100 CN200 c • When shorting pins 1 and 2 on CN100, DO NOT short pins 2 and 3 on CN200. IMPORTANT • When shorting pins 2 and 3 on CN100, DO NOT short pins 1 and 2 on CN200. State Power supply/SG not separated (Initial setting) Power supply/SG separated CN100 JP setting CN200 JP setting 1-2 pin shorted 1-2 pin shorted 2-3 pin shorted 2-3 pin shorted Jumper pin Once jumper settings are performed, install the covers using the following procedure. 7 Install the internal cover and affix it using the screws (x 4). 8 Install the left side cover and affix it using the screws (x 5). 62