Epson ColorWorks CW-C6500A Technical Reference Guide - External I/O CW-C6000/C - Page 19
Commands, External I/O input
View all Epson ColorWorks CW-C6500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Chapter 3 Commands No. Command name category Command function Command and parameters 11 External I/O input Pause signal mode setting signal settings ^S(CNI,P,c c= 0/1 0: Ignore pause signal. 1: Switch the pause state if Low is asserted for the pause signal for 20 msec or longer. 12 H e a d c l e a n i n g s i g n a l m o d e ^S(CNI,C,c setting c= 0/1 0: Ignore cleaning signal. 1: Clean if Low is asserted for the cleaning signal for 20 msec or longer. 13 Clogged nozzle check signal mode ^S(CNI,D,c setting c= 0/1 0: Ignore clogged nozzle check signal. 1: Check for clogged nozzle if Low is asserted for the clogged nozzle check sig- nal for 20 msec or longer. 14 Feed signal mode setting ^S(CNI,F,c c= 0/3 3 0: Ignore feed label signal. 1: Continue feeding the label as long as Low is asserted. 15 Mode setting for start print signal ^S(CNI,S,c c= 0/1/3 0: Ignore start print signal. (Normal print mode in which the printer receives and prints data, without using the start print signal input to the external I/O.) 1: Issue a label if Low is asserted for the start print signal for 20 msec or longer. 3: Continue issuing labels as long as Low is asserted for the start print signal. 16 Mode setting for re-print signal ^S(CNI,R,c c= 0/1 0: Ignore reprint label signal. 1: Reprint the previously printed label if Low is asserted for the reprint label signal for 20 msec or longer. 19