Epson ColorWorks CW-C6500A Technical Reference Guide - External I/O CW-C6000/C - Page 35
Mode setting for feed signal (input
View all Epson ColorWorks CW-C6500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 3 Commands Mode setting for feed signal (input) [Format] ^S(CNI,F,c [Parameter] c Description c = Mode setting 0/3 Definition range [Function] Configure the mode settings for the feed signal. Value for parameter c Description 0 Ignore the feed signal (pin 11). 3 Set the feed signal (pin 11) to the following mode: Feed the label as long as a Low signal is input. [Initial value] 0 [Examples of command transmissions] 3 Set the feed signal to "Feed the label as long as a Low signal is input". The ^JUS command must be used to save the settings to the non-volatile memory in the printer. An example of the command transmission is shown below. It is sent via USB or Ethernet from the computer. ^XA ^S(CNI,F,3 ^JUS ^XZ 35
35
Chapter 3
Commands
3
Mode setting for feed signal (input)
[Format]
^S(CNI,F,c
[Parameter] c
[Function]
Configure the mode settings for the feed signal.
[Initial value]
0
[Examples of command transmissions]
Set the feed signal to "Feed the label as long as a Low signal is input".
The ^JUS command must be used to save the settings to the non-volatile memory in the printer.
An example of the command transmission is shown below. It is sent via USB or Ethernet from the computer.
^XA
^S(CNI,F,3
^JUS
^XZ
Description
Definition range
c = Mode setting
0/3
Value for parameter c
Description
0
Ignore the feed signal (pin 11).
3
Set the feed signal (pin 11) to the following mode:
Feed the label as long as a Low signal is input.