Epson ColorWorks CW-C6500A Technical Reference Guide - External I/O CW-C6000/C - Page 32
Mode setting for pause signal (input
View all Epson ColorWorks CW-C6500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Mode setting for pause signal (input) [Format] ^S(CNI,P,c [Parameter] c Description c = Mode setting 0/1 Definition range [Function] Configure the mode settings for the pause signal. Value for parameter c Description 0 Ignore the pause signal (pin 12). 1 Set the pause signal (pin 12) to the following mode: Switch to the pause state when a Low signal is input for 20 msec or longer. [Initial value] 0 [Examples of command transmissions] Set the pause signal to "Switch to the pause state when a Low signal is input for 20 msec or longer". The ^JUS command must be used to save the settings to the non-volatile memory in the printer. An example of the command transmission is shown below. It is sent via USB or Ethernet from the computer. ^XA ^S(CNI,P,1 ^JUS ^XZ 32