Epson ColorWorks CW-C6500A Technical Reference Guide - External I/O CW-C6000/C - Page 53
Settings on the Printer, End Print Signal Mode Settings, Mode Setting for Start Print Signal
View all Epson ColorWorks CW-C6500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Chapter 6 Settings on the Printer Settings on the Printer This section describes items that can be set from the printer operation panel. All items can be set from the PC utility (PrinterSetting). End Print Signal Mode Settings The settings are as follows. Setting value (mode) Description Disable end print signal Turn the end print signal OFF. (End print signal not output) Mode 1 Set the end print signal (pin 18) as follows: Normal: High, When feeding paper: Low. Mode 2 Set the end print signal (pin 18) as follows: Normal: Low, When feeding paper: High. Mode 3 Set the end print signal (pin 18) as follows: Normal: High, When continuous printing ends and the printer stops at the predetermined position: Low for 20 msec. Mode 4 Set the end print signal (pin 18) as follows: Normal: Low, When continuous printing ends and the printer stops at the predetermined position: High for 20 msec. Mode Setting for Start Print Signal The settings are as follows. Setting value (mode) Description Disable Pulse mode Turn the start print signal (pin 10) OFF. (Normal print mode in which the printer receives and prints data, without using the start print signal input to the external I/O.) 6 Set the start print signal (pin 10) to the following mode: Print labels when a Low signal is input for 20 msec or longer. Level mode Set the start print signal (pin 10) to the following mode: Print labels as long as a Low signal is input. 53