Epson ColorWorks CW-C6500A Technical Reference Guide - External I/O CW-C6000/C - Page 42

Acquisition command of mode setting value for paper out signal (input), Acquisition commands

Get Epson ColorWorks CW-C6500A PDF manuals and user guides View all Epson ColorWorks CW-C6500A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Acquisition command of mode setting value for paper out signal (input) [Format] ~H(CNA,P [Parameter] None [Function] This acquires the mode setting value for the paper out signal. Return value after executing this command Description D/0 Mode in which the paper out signal (pin 25) is OFF (not output) 1 Mode in which the paper out signal (pin 25) is as follows: Normal: High, When there is no paper: Low E/2 Mode in which the paper out signal (pin 25) is as follows: Normal: Low, When there is no paper: High Acquisition commands for mode setting values for pause signal (input) [Format] ~H(CNI,P [Parameter] None [Function] Acquire the mode setting values for the pause signal. Return value after executing this command Description 0 Pause signal (pin 12) ignored 1 Pause signal (pin 12) set to switch to the pause state when a Low signal is input for 20 msec or longer 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
42
Acquisition command of mode setting value for paper out signal (input)
[Format]
~H(CNA,P
[Parameter] None
[Function]
This acquires the mode setting value for the paper out signal.
Acquisition commands for mode setting values for pause signal (input)
[Format]
~H(CNI,P
[Parameter] None
[Function]
Acquire the mode setting values for the pause signal.
Return value after
executing this command
Description
D/0
Mode in which the paper out signal (pin 25) is OFF (not output)
1
Mode in which the paper out signal (pin 25) is as follows: Normal: High, When there is no
paper: Low
E/2
Mode in which the paper out signal (pin 25) is as follows: Normal: Low, When there is no
paper: High
Return value after
executing this command
Description
0
Pause signal (pin 12) ignored
1
Pause signal (pin 12) set to switch to the pause state when a Low signal is input for 20
msec or longer