Epson Expression 800 User Manual - TWAIN 32 - Page 38

Scanning Transparencies If you've installed an optional transparency unit, follow these steps to scan negative or positive transparencies: The transparency unit comes with the Professional model of the scanner and is an option for the Executive and Artist models. See your electronic EPSON Expression 800 Reference Guide for complete information on installing and using the transparency unit. 1 Place the transparency in the transparency unit. See the electronic EPSON Expression 800 Reference Guide for instructions. 2 Access the SilverFast Lite window as described in Accessing SilverFast Lite. 3 Return all settings to their defaults by holding down the Shift key and clicking the Reset button; the button changes to Reset All and resets all your settings. 4 Change the Original setting to the type of transparency you're scanning. For positive transparencies, such as slides, select Pos. Transparency. For negative transparencies, such as 35 mm film strips, select Neg. Transparency or 35 mm. If you're scanning positive, reflective originals (such as a printed photograph) with the optional transparency unit installed, be sure to use the reflective document mat and select Reflective as the Original setting. for positive transparencies for negative transparencies 5 Set the Scan Mode and Scan Type settings as described in Selecting a Scan Mode and Selecting the Scan Type. 6 Click the Prescan button. The prescan image appears in the window. 7 Frame the image as necessary; see Framing for instructions. Advanced Scanning Page 38