Fujitsu Fi-5110EOX2 Getting Started - Page 22

6. Consumables/Carrier Sheet This chapter describes how to replace and purchase consumables and regular replacement parts. WARNING Fire/Electric Shock Before you replace the consumables of this scanner, disconnect the AC adapter from the outlet to turn off the scanner. 6.1. Part Numbers and Replacement Cycle of Consumables The following table lists the part numbers of consumables and shows rough guidelines for replacing these parts. No. Description P/N Replacement Cycle 1 fi-5110EOX Pad ASSY PA03360-0002 50,000 scan or one year 2 fi-5110EOX Pick roller PA03360-0001 100,000 scans or one year These replacement cycles are rough guidelines when A4/Letter wood-free paper 64 g/m2 (17 lb) is used. The actual cycle may differ depending on the scanned paper. Use only the consumables specified by PFU LIMITED. To estimate when the consumables will have HINT to be replaced and to get an overlook of the already scanned pages, please refer to the following: 1. Right click the "ScanSnap Manager" icon S on the task tray. 2. Click [Check consumable supplies] at the menu. 6.2. Replacing the Pad ASSY Replace the Pad ASSY following the procedure below. 1. Remove the documents on the Paper chute cover. 2. Open the ADF cover while pulling the Cover open lever. Paper chute cover ADF cover Cover open lever 3. Remove the Pad ASSY. Pull out the Pad ASSY in the direction of the arrow while holding both ends of the Pad ASSY. Pad ASSY ADF cover ( The screen ("Check consumable status" window) that indicates how many times consumables have been used will be displayed.
Replace the consumables referring to "Target to change supplies" as a rough guideline. For details about consumables and where to purchase them, visit the following Website or contact the store where you purchased your scanner. [Website] http://scansnap.fujitsu.com/ 4. Attach the new Pad ASSY. Pad ASSY ADF cover Make sure that the Pad ASSY is completely attached. Otherwise, document jams or other feeding errors may occur. 18 |