Gateway NX560 Reference Guide - Page 105
module is keyed so it can only be inserted in one, direction. If the module does not fit
View all Gateway NX560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
www.gateway.com 10 If you are removing a module, gently press outward on the clip at each end of the memory module until the module tilts upward. 11 Pull the memory module out of the slot. 12 Hold the new or replacement module at a 30-degree angle and press it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay. 97
www.gateway.com
97
10
If you are removing a module, gently press outward on
the clip at each end of the memory module until the
module tilts upward.
11
Pull the memory module out of the slot.
12
Hold the new or replacement module at a 30-degree
angle and press it into the empty memory slot. This
module is keyed so it can only be inserted in one
direction. If the module does not fit, make sure that the
notch in the module lines up with the tab in the memory
bay.