Gigabyte GA-990FXA-UD3 Manual - Page 11

x audio jacks Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker - cpu support

Page 11 highlights

USB IEEE 1394 Internal Connectors Back Panel Connectors I/O Controller Hardware Monitor ŠŠ South Bridge: - Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through the internal USB headers) ŠŠ 2 x Etron EJ168 chips: - Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) ŠŠ VIA VT6308 chip: - Up to 2 IEEE 1394a ports (1 port on the back panel, 1 port available through the internal IEEE 1394a header) ŠŠ 1 x 24-pin ATX main power connector ŠŠ 1 x 8-pin ATX 12V power connector ŠŠ 6 x SATA 6Gb/s connectors ŠŠ 1 x CPU fan header ŠŠ 2 x system fan headers ŠŠ 1 x power fan header ŠŠ 1 x front panel header ŠŠ 1 x front panel audio header ŠŠ 1 x S/PDIF Out header ŠŠ 3 x USB 2.0/1.1 headers ŠŠ 1 x USB 3.0/2.0 header ŠŠ 1 x IEEE 1394a header ŠŠ 1 x Trusted Platform Module (TPM) header ŠŠ 1 x serial port header ŠŠ 1 x clearing CMOS jumper ŠŠ 1 x PS/2 keyboard/mouse port ŠŠ 1 x optical S/PDIF Out connector ŠŠ 8 x USB 2.0/1.1 ports ŠŠ 2 x USB 3.0/2.0 ports ŠŠ 1 x IEEE 1394 port ŠŠ 2 x eSATA 6Gb/s connectors ŠŠ 1 x RJ-45 port ŠŠ 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone) ŠŠ iTE IT8720 chip ŠŠ System voltage detection ŠŠ CPU/System temperature detection ŠŠ CPU/System/Power fan speed detection ŠŠ CPU overheating warning ŠŠ CPU/System/Power fan fail warning ŠŠ CPU/System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. - 11 - Hardware Installation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

- 11 -
Hardware Installation
USB
South Bridge:
±
-
Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available
through the internal USB headers)
2 x Etron EJ168 chips:
±
-
Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available
through the internal USB header)
IEEE 1394
VIA VT6308 chip:
±
-
Up to 2 IEEE 1394a ports (1 port on the back panel, 1 port available through
the internal IEEE 1394a header)
Internal
Connectors
1 x 24-pin ATX main power connector
±
1 x 8-pin ATX 12V power connector
±
6 x SATA 6Gb/s connectors
±
1 x CPU fan header
±
2 x system fan headers
±
1 x power fan header
±
1 x front panel header
±
1 x front panel audio header
±
1 x S/PDIF Out header
±
3 x USB 2.0/1.1 headers
±
1 x USB 3.0/2.0 header
±
1 x IEEE 1394a header
±
1 x Trusted Platform Module (TPM) header
±
1 x serial port header
±
1 x clearing CMOS jumper
±
Back Panel
Connectors
1 x PS/2 keyboard/mouse port
±
1 x optical S/PDIF Out connector
±
8 x USB 2.0/1.1 ports
±
2 x USB 3.0/2.0 ports
±
1 x IEEE 1394 port
±
2 x eSATA 6Gb/s connectors
±
1 x RJ-45 port
±
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker
±
Out/Line In/Line Out/Microphone)
I/O Controller
iTE IT8720 chip
±
Hardware
Monitor
System voltage detection
±
CPU/System temperature detection
±
CPU/System/Power fan speed detection
±
CPU overheating warning
±
CPU/System/Power fan fail warning
±
CPU/System fan speed control
±
*
Whether the CPU/system fan speed control function is supported will depend on
the CPU/system cooler you install.