Gigabyte GA-990FXA-UD3 Manual - Page 46

OnChip SATA Port4/5 Type AMD SB950, SATA3_4 and SATA3_5 connectors - how to enable ahci on

Page 46 highlights

2-6 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2011 Award Software Integrated Peripherals OnChip SATA Controller OnChip SATA Type x OnChip SATA Port4/5 Type x OnChip SATA RAID5 Support OnChip SATA3.0 Support x OnChip SATA Port as ESP F_USB30 Controller eSATA3 Controller eSATA3 Ctrl Mode Onboard LAN Function Onboard LAN Boot ROM } SMART LAN Onboard Audio Function Onboard 1394 Function R_USB30 Controller USB Controllers USB Legacy Function USB Storage Function Onboard Serial Port 1 [Enabled] [Native IDE] IDE Enabled [Enabled] Press Enter [Enabled] [Enabled] [IDE] [Enabled] [Disabled] [Press Enter] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [3F8/IRQ4] Item Help Menu Level  Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults OnChip SATA Controller (AMD SB950, SATA3_0~SATA3_5 connectors) Enables or disables the integrated SATA controller. (Default: Enabled) OnChip SATA Type (AMD SB950, SATA3_0~SATA3_3 connectors) Configures the operating mode of the SATA3_0~SATA3_3 connectors. Native IDE Allows the SATA controller to operate in Native IDE mode. (Default) Enable Native IDE mode if you wish to install operating systems that support Native mode. RAID Enables RAID for the SATA controller. AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. OnChip SATA Port4/5 Type (AMD SB950, SATA3_4 and SATA3_5 connectors) This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating mode of the integrated SATA3_4 and SATA3_5 connectors. IDE Disables RAID for the SATA controller and configures the SATA controller to IDE mode. (Default) As SATA Type The mode depends on the OnChip SATA Type settings. OnChip SATA RAID5 Support (AMD SB950, SATA3_0~SATA3_5 connectors) Enables or disables RAID 5 support for the SATA controller integrated in the AMD SB950 South Bridge. This option is configurable only when OnChip SATA Type is set to RAID. OnChip SATA3.0 Support Enables or disables the SATA 6Gb/s function integrated in the South Bridge. When set to Disabled, the SATA controller will operate in SATA 3Gb/s mode. (Default: Enabled) BIOS Setup - 46 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

BIOS Setup
- 46 -
2-6
Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Integrated Peripherals
OnChip SATA Controller
[Enabled]
OnChip SATA Type
[Native IDE]
x
OnChip SATA Port4/5 Type
IDE
x
OnChip SATA RAID5 Support
Enabled
OnChip SATA3.0 Support
[Enabled]
x
OnChip SATA Port as ESP
Press Enter
F_USB30 Controller
[Enabled]
eSATA3 Controller
[Enabled]
eSATA3 Ctrl Mode
[IDE]
Onboard LAN Function
[Enabled]
Onboard LAN Boot ROM
[Disabled]
SMART LAN
[Press Enter]
Onboard Audio Function
[Enabled]
Onboard 1394 Function
[Enabled]
R_USB30 Controller
[Enabled]
USB Controllers
[Enabled]
USB Legacy Function
[Enabled]
USB Storage Function
[Enabled]
Onboard Serial Port 1
[3F8/IRQ4]
higf
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
OnChip SATA Controller (AMD SB950, SATA3_0~SATA3_5 connectors)
Enables or disables the integrated SATA controller. (Default: Enabled)
OnChip SATA Type (AMD SB950, SATA3_0~SATA3_3 connectors)
Configures the operating mode of the SATA3_0~SATA3_3 connectors.
Native IDE
Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that support Native
mode.
RAID
Enables RAID for the SATA controller.
AHCI
Configures the SATA controller to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
OnChip SATA Port4/5 Type (AMD SB950, SATA3_4 and SATA3_5 connectors)
This option is configurable only when
OnChip SATA Type
is set to
RAID
or
AHCI
. Configures the oper
-
ating mode of the integrated SATA3_4 and SATA3_5 connectors.
IDE
Disables RAID for the SATA controller and configures the SATA controller to IDE
mode. (Default)
As SATA Type
The mode depends on the
OnChip SATA Type
settings.
OnChip SATA RAID5 Support (AMD SB950, SATA3_0~SATA3_5 connectors)
Enables or disables RAID 5 support for the SATA controller integrated in the AMD SB950 South Bridge.
This option is configurable only when
OnChip SATA Type
is set to
RAID
.
OnChip SATA3.0 Support
Enables or disables the SATA 6Gb/s function integrated in the South Bridge. When set to
Disabled
, the
SATA controller will operate in SATA 3Gb/s mode. (Default: Enabled)