HealthRider 230 English Manual - Page 6
Carriage Bolts 45 in the Seat Base 6. Hand tighten
View all HealthRider 230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
4. Place the bracket on the lower end of the Main 4 Upright (1) over the indicated 3/8Ó x 2 3/4Ó Carriage Bolts (45) in the Stabilizer (4). Hand tighten two 3/8Ó Nylon Locknuts (50) onto the Bolts. Do not tighten the Nylon Locknuts yet. Insert two 3/8Ó x 3Ó Bolts (53) with two 3/8Ó Flat Washers (55) through the indicated holes in the Stabilizer (4) and the bracket on the Main Upright (1). 1 50 53 50 53 55 5. Press a 2Ó Square Inner Cap (28) into the end of the Seat Base (6). 55 4 45 Insert two 3/8Ó x 2 3/4Ó Carriage Bolts (45) up through the indicated holes in the Seat Base (6) and secure 5 the bolt heads with pieces of tape to prevent them from falling out. Insert a 3/8Ó x 3 1/2Ó Bolt (56) up through the welded 4 tube on the Seat Base (6) and secure the bolt head with tape. Place the Seat Base (6) on the floor with the holes in the mounting bracket over the 3/8Ó x 3Ó Bolts (53) going through the Stabilizer (4) and the bracket on the Main Upright (1). Hand tighten two 3/8Ó Nylon Locknuts (50) onto the Bolts. Do not tighten the Nylon Locknuts yet. 1 50 53 56 Welded Tube 6 45 28 6. Place the Seat Frame (7) onto the 3/8Ó x 2 3/4Ó Carriage Bolts (45) in the Seat Base (6). Hand tighten two 3/8Ó Nylon Locknuts (50) onto the Bolts. Do not tighten the Nylon Locknuts yet. Locate two 3/8Ó x 3Ó Bolts (53) and slide a 3/8Ó Flat Washer (55) onto each Bolt. Insert the 3/8Ó x 3Ó Bolts through the indicated holes in the Main Upright (1) and the bracket on the Seat Frame (7). Hand tighten two 3/8Ó Nylon Locknuts (50) onto the Bolts. Do not tighten the Nylon Locknuts yet. 6 53 55 1 50 7 50 50 45 6 6