HP 166207-B21 Smart Array 5300 Controller User Guide - Page 38
Enter, Caution, reprogramming is complete.
UPC - 720591292225
View all HP 166207-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Updating the Controller Firmware 5. If the controller that you want to update the firmware for is on the list of programmable devices, select it and press the Enter key. (If it is not present, you are prompted to insert the remaining diskettes for devices not listed on the first diskette.) 6. The action that you must now take depends on the message on the screen. - If the screen message reads as follows, press the Enter key, and then go to step 8 of these instructions: The ROM image files found for the device selected are not newer than the current ROM image - If the ROM firmware currently on the controller is older than that on the Options ROMPaq diskette, then the screen message reads as follows: Device to reprogram: All Compaq Smart Array nnnn Controller(s) Controller(s) Current ROM revision: Compaq Smart Array nnnn Controller x.xx Select Firmware Images: Compaq Smart Array nnnn Controller y.yy In this case, press the Enter key and then go to step 7. 7. Review the information on the Caution screen, and then press the Enter key to reprogram the controller ROM. The following message is displayed: Reprogramming Firmware Do not interrupt the reprogramming process. You will be notified when reprogramming is complete. 8. When the reprogramming of the array controller ROM is finished, you can reprogram more options or exit the utility. - To reprogram another Compaq option, press the Enter key, and then repeat steps 5 through 7. - If you have finished reprogramming Compaq options, press the Esc key to exit the utility. 9. Remove the Options ROMPaq diskette and restart the server. Compaq Smart Array 5300 Controller User Guide 5-5