HP 166207-B21 Smart Array 5300 Controller User Guide - Page 65
Extending Logical Drive Capacity, Create Logical Drives screen
UPC - 720591292225
View all HP 166207-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Configuring an Array Figure 7-20: Create Logical Drives screen 6. Click Create Logical Drive. 7. Set the fault tolerance, stripe size, array accelerator, and size for the second logical drive that you want to create on Array A. 8. Click Done to return to the Create Logical Drives screen. 9. Click Done again to return to the main ACU screen. 10. On the menu bar, select Controller, Save Configuration. The settings for the new logical drive are saved and the capacity expansion process begins. NOTE: The new logical drive is not built until after the controller has finished the capacity expansion process on Array A. This takes about 15 minutes per gigabyte. Data can still be read from or written to any other existing logical drive on the controller, although performance might be reduced. However, a controller can perform only one expansion, extension, or migration at any given time. Extending Logical Drive Capacity Logical drive capacity extension is the addition of storage capacity to an existing logical drive. For logical drive extension to be possible, sufficient free capacity must exist on the array. If necessary, create free capacity by deleting existing logical drives on the array or by performing an array expansion (for details, refer to "Expanding Array Capacity"). Compaq Smart Array 5300 Controller User Guide 7-23