HP 166207-B21 Smart Array 5300 Controller User Guide - Page 74
Configuring the New Logical Drive, Configuring the Controller Settings, Logical Configuration View
UPC - 720591292225
View all HP 166207-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Configuring an Array Configuring the New Logical Drive 1. In the Logical Configuration View panel, highlight the new logical drive that you want to configure, and then press the Enter key. 2. Select Fault Tolerance in the Logical Drive Options menu, and then press the Enter key. 3. Choose the RAID level that you want and then press the Enter key. 4. Choose Stripe Size and then press the Enter key. 5. Choose the stripe size that you want and then press the Enter key. 6. Press the Esc key to accept the settings and return to the main manual configuration screen. Configuring the Controller Settings The Controller Settings option allows you to choose the drive rebuild priority, expansion priority, and accelerator ratio for all arrays on the controller. • With a low priority setting, a rebuild or expansion takes place only when the array controller is not busy handling normal I/O requests. This setting has minimal effect on normal I/O operations. However, there is an increased risk that data will be lost if another physical drive fails while the rebuild is in progress. • With a high priority setting, the rebuild or expansion occurs at the expense of normal I/O operations. Although performance is affected, this setting provides better data protection because the array is vulnerable to additional drive failures for a shorter time. NOTE: Logical drives can be rebuilt only if they are configured for fault tolerance (RAID 1+0, RAID 5, or RAID ADG). Drive rebuild begins automatically after you have replaced a failed physical drive in the array. The accelerator read/write ratio determines the amount of memory allocated to the read and write caches on the array accelerator. Different applications have different optimum settings. Some controllers (especially those without battery-backed write cache) do not allow this ratio to be changed. 7-32 Compaq Smart Array 5300 Controller User Guide