HP 166207-B21 Smart Array 5300 Controller User Guide - Page 92
Using the Enabler Module, Location of the RAID ADG Enabler Module
UPC - 720591292225
View all HP 166207-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Upgrading and Replacing Options For further instructions or clarifications regarding the software key installation procedure, refer to the ACU-XE online help. Using the Enabler Module The connector for the RAID ADG Enabler Module is located at the corner of the controller board near the array accelerator connector socket, as shown in Figure 9-14. The module attaches to the controller board with the narrow tab (circled in Figure 9-15) nearest to the corner of the controller board. This tab can be pressed outwards during installation to allow the module to be more readily inserted into the board. The clips at each end of the module fit into the slots on the board. Figure 9-14: Location of the RAID ADG Enabler Module connector on the Smart Array 5300 Controller board Compaq Smart Array 5300 Controller User Guide 9-13