HP 2500 HP Jetdirect Print Servers - Administrator Guide - Page 87

Table 3.4 Telnet Commands and Parameters (7 of 18) subnet-mask A value (in dotted notation) that identifies the network and host portions of an IP address in received messages. For example, subnet-mask 255.255.255.0 stores the subnet mask value 255.255.255.0 on the print server. The value 0.0.0.0 disables the subnet mask. For more information see Appendix A. default-gw The IP address of a default gateway, in dotted notation. For example, default-gw 192.168.40.1 assigns 192.168.40.1 as the IP address of the default gateway for the print server. Note: If the HP Jetdirect print server is configured by DHCP and you manually change the subnet mask or the default gateway address, you should manually change the print server's IP address. This will release the DHCP-assigned address back to the DHCP IP address pool. Config Server (Read-only parameter) The IP address of the server (such as a BOOTP or DHCP server) that last configured the IP address on the HP Jetdirect print server. TFTP Server (Read-only parameter) The IP address of the TFTP server that provided TFTP parameters to the HP Jetdirect print server. TFTP Filename (Read-only parameter) The path and TFTP filename on the TFTP server. For example, hpnp/printer1.cfg domain-name The domain name for the device. For example, domain-name support.hp.com assigns support.hp.com as the domain name. The domain name does not include the host name; it is not the Fully Qualified Domain Name (such as printer1.support.hp.com). dns-svr IP address of the DNS (Domain Name System) server. pri-wins-svr The IP address of the primary Windows Internet Name Service (WINS) server, in dotted notation. sec-wins-svr The IP address of the secondary Windows Internet Name Service (WINS) server, in dotted notation. smtp-svr (SMTP Mail Server) The IP address of the outgoing e-mail Simple Mail Transport Protocol (SMTP) server, for use with supported Scan devices. ENWW TCP/IP Configuration 87