HP 3PAR StoreServ 7450 2-node HP 3PAR StoreServ 7450 Storage Troubleshooting G - Page 51

Port Example 2, Port Suggested Action 2

Page 51 highlights

Port Example 2 Component -Description- Qty Port Missing SFPs 1 Component -Identifier- -Description-- Port port:0:3:1 SFP is missing Port Suggested Action 2 FC node-ports that normally contain SFPs will report an error if the SFP has been removed. The condition can be checked using the showport -sfp command. In this example, the SFP in 0:3:1 has been removed from the adapter: cli% showport -sfp N:S:P -State- -Manufacturer- MaxSpeed(Gbps) TXDisable TXFault RXLoss DDM 0:0:1 OK FINISAR_CORP. 2.1 No No No Yes 0:0:2 OK FINISAR_CORP. 2.1 No No No Yes 0:3:1 - - - - - - - 0:3:2 OK FINISAR_CORP. 2.1 No No No Yes Port Example 3 Component -Description- Qty Port Disabled SFPs 1 Component -Identifier- --Description-- Port port:3:5:1 SFP is disabled Port Suggested Action 3 A node-port SFP will be disabled if the port has been placed offline using the controlport offline command. Also see Example 4. cli% showport -sfp N:S:P -State- -Manufacturer- MaxSpeed(Gbps) TXDisable TXFault RXLoss DDM 3:5:1 OK FINISAR_CORP. 4.1 Yes No No Yes 3:5:2 OK FINISAR_CORP. 4.1 No No No Yes Port Example 4 Component -Description- Qty Port Offline ports 1 Component -Identifier- --Description-- Port port:3:5:1 is offline Port Suggested Action 4 Check the state of the port with showport. If a port is offline, it was deliberately put in that state using the controlport offline command. Offline ports may be restored using controlport rst. cli% showport N:S:P Mode 3:5:1 target State ----Node_WWN---- -Port_WWN/HW_Addr- Type offline 2FF70002AC00054C 23510002AC00054C free Troubleshooting Storage System Components 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67

Port Example 2
Component -Description- Qty
Port
Missing SFPs
1
Component -Identifier- -Description--
Port
port:0:3:1
SFP is missing
Port Suggested Action 2
FC node-ports that normally contain SFPs will report an error if the SFP has been removed. The
condition can be checked using the
showport -sfp
command. In this example, the SFP in 0:3:1
has been removed from the adapter:
cli% showport -sfp
N:S:P -State- -Manufacturer- MaxSpeed(Gbps) TXDisable TXFault RXLoss DDM
0:0:1 OK
FINISAR_CORP.
2.1 No
No
No
Yes
0:0:2 OK
FINISAR_CORP.
2.1 No
No
No
Yes
0:3:1 -
-
- -
-
-
-
0:3:2 OK
FINISAR_CORP.
2.1 No
No
No
Yes
Port Example 3
Component -Description- Qty
Port
Disabled SFPs
1
Component -Identifier- --Description--
Port
port:3:5:1
SFP is disabled
Port Suggested Action 3
A node-port SFP will be disabled if the port has been placed offline using the
controlport
offline
command. Also see Example 4.
cli% showport -sfp
N:S:P -State- -Manufacturer- MaxSpeed(Gbps) TXDisable TXFault RXLoss DDM
3:5:1 OK
FINISAR_CORP.
4.1 Yes
No
No
Yes
3:5:2 OK
FINISAR_CORP.
4.1 No
No
No
Yes
Port Example 4
Component -Description- Qty
Port
Offline ports
1
Component -Identifier- --Description--
Port
port:3:5:1
is offline
Port Suggested Action 4
Check the state of the port with
showport
. If a port is offline, it was deliberately put in that state
using the
controlport offline
command. Offline ports may be restored using
controlport
rst
.
cli% showport
N:S:P
Mode
State ----Node_WWN---- -Port_WWN/HW_Addr-
Type
3:5:1
target
offline 2FF70002AC00054C
23510002AC00054C
free
Troubleshooting Storage System Components
51