HP 6100 HP 4x00/6x00/8x00 Enterprise Virtual Array Updating Product Software G - Page 28
Linux, Table 4 IBM AIX timeout settings
View all HP 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Table 4 IBM AIX timeout settings Setting PR_key_value Algorithm hcheck_interval hcheck_mode queue_depth reserve_policy rw_timeout Value NA fail_over 60 nonactive 8 Single path 60 Description Sets the key value for persistent reservations. Persistent reservations are not supported. Sets the load balancing algorithm to fail_over. All I/O uses a single path. The remaining paths are in standby mode. The value round_robin is not supported. Sets the path health feature to check each device every 60 seconds. Specifies the I/O paths monitored by the path health checking feature: nonactive-Checks all I/O paths for Failed status, and checks standby paths for Used/Opened devices. Sets the queue depth. Sets the reserve policy to standard SCSI-2 reservations. Sets the read/write timeout to 60 seconds. Linux The following configuration recommendations apply to both RedHat and SuSE. QLogic Driver parameters (failover enabled): • qdepth = 16 • port_down_retry_count = 30 • login_retry_count = 30 • failover = 1 • load_balancing = 1 • excludemodel = 0x0 • auto_restore = 0xA6 QLogic Driver parameters (single path): • qdepth = 16 • port_down_retry_count = 64 • login_retry_count = 30 • failover = 1 • load_balancing = 1 • excludemodel = 0x0 • auto_restore = 0xA6 Emulex Driver parameters (single path) • HPELXLPFC=y • nodev_timeout=60 • qdepth=30 • discovery_threads=1 28 Pre-upgrade tasks