HP 6100 HP 4x00/6x00/8x00 Enterprise Virtual Array Updating Product Software G - Page 35
Preparing an HP Continuous Access EVA environment for upgrading
View all HP 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Figure 8 Controller Events (Initialized system) window d. Check the Severity field to determine if any unexpected Critical events have occurred. If Critical events have occurred, perform the steps outlined in the corrective action codes to correct the problems. In some cases, it may be necessary to call your HP-authorized service representative to fix the problem. 3. Verify that no changes to the storage system configuration are in progress. For example, you should not be in the process of creating a virtual disk. Configuration changes should not be made within 48 hours before beginning the upgrade. Proactive event notification can be used to alert you if a critical event occurs during the 48 hours before the upgrade. NOTE: • The leveling process does not impact the upgrade. If leveling is in progress, the upgrade can be performed. The leveling will be suspended during the upgrade and resumed when the upgrade is complete. • Ensure you suspend any processes or applications that may change the storage system configuration, such as backups and snapshot creation or deletion. Stop any HP Storage System Scripting Utility scripts that are scheduled to run automatically. Preparing an HP Continuous Access EVA environment for upgrading Estimated time to complete: Varies depending on replication configuration When to perform: As close as possible to the upgrade When upgrading an EVA in an HP Continuous Access EVA environment, the following requirements must be met: • Perform the controller software upgrade using the local management server (the server running HP Command View EVA that is local to the EVA being upgraded). • Before you upgrade the controller software, you must upgrade HP Command View EVA (and layered applications) to the required version on both the source and destination storage systems. • Before you upgrade any storage system in an HP Continuous Access EVA relationship, ensure that all storage systems in the storage network are running the same version of controller software. This will ensure that when you upgrade one storage system, the storage network Preparing an HP Continuous Access EVA environment for upgrading 35