HP 6100 HP 4x00/6x00/8x00 Enterprise Virtual Array Updating Product Software G - Page 52
Entering the password on the OCP, Enabling password access in HP Command View EVA
View all HP 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
• Can include the following characters Cannot include the following characters: space ~ \ Entering the password on the OCP Using the following procedure to enter the password on the storage system controllers. The password can be entered from either controller. 1. With either of the default menus (Storage System Name or World Wide Name) displayed, press three times to display System Password. 2. Press to display Change Password? 3. Press Enter for yes. The default password, AAAAAAAA~~~~~~~~, is displayed. 4. Press or to select the desired character. 5. Press to accept this character and select the next character. 6. Repeat the process to enter the remaining password characters. 7. Press Enter to enter the password and return to the default display. Enabling password access in HP Command View EVA Estimated time to complete: 10 minutes After entering a password on the OCP, you must enable password access in HP Command View EVA. To enable password access to a storage system, perform the following steps: 1. Start HP Command View EVA in your browser. 2. Click Agent Options in the Session pane. The Management Agent Options window opens. 3. Click Storage system password access. The Storage System Password Access window opens. 4. Click Enable. The Enable Password Access to a Storage System window opens. Figure 24 Enable Password Access to a Storage System window 5. Select the World Wide Node Name of the storage system for which you want to enable password access. 6. Enter the password in the Password and Confirm password fields. NOTE: Make sure you use the same password you entered on the controller OCP. 7. Click Enable Password. A message box opens. 52 Upgrading the Enterprise Virtual Array