HP 6125G HP 6125-CMW520-R2106 Release Notes - Page 27
Performing a RAM test, Using the EXTEND-BOOTWARE menu
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Memory Type Memory Size Memory Speed BootWare Size Flash Size CPLD Version PCB Version : DDR3 SDRAM : 1024MB : 800MHz : 895KB : 256MB : 003 : Ver.B BootWare Validating... Press Ctrl+B to enter extended boot menu... Running the backup extended BootWare segment To bootstrap the system software image with the backup extended BootWare segment, enter 5 in the BASIC-BOOTWARE menu. For information about backing up the extended BootWare segment, see "Managing the BootWare image." Enter your choice(0-5): 5 Booting Backup Extend BootWare The Extend BootWare is self-decompressing Done! Accessing the BASIC-ASSISTANT menu To access the BASIC-ASSISTANT BOOTWARE menu, press Ctrl + U while you are in the BASIC-BOOTWARE menu. BASIC-ASSISTANT MENU | RAM Test | | Exit To Main Menu | Enter your choice(0-1): Table 9 BASIC-ASSISTANT menu Option RAM Test Exit to Main Menu Task Perform RAM self-test. Return to the BASIC-BOOTWARE menu. Performing a RAM test To perform a RAM test, press Ctrl + T within four seconds after the prompt message " Press Ctrl+T to start memory test" appears (see "Accessing the BASIC-ASSISTANT menu"). Using the EXTEND-BOOTWARE menu To access the EXTEND-BOOTWARE menu: 23