HP 6125G HP 6125-CMW520-R2106 Release Notes - Page 33

Option, Tasks, Field, Description

Get HP 6125G PDF manuals and user guides View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Table 12 Ethernet submenu options Option Tasks Download Application Program To SDRAM And Run Load and run a system software image in SDRAM. If password recovery capability is disabled, this option is not available. Update Main Application File Download a system software image to the current storage medium as the main image (the file attribute is set to M). If a main system image already exists, the M file attribute of the original image is removed. Modify Ethernet Parameter Configure FTP or TFTP file transfer settings. Exit To Main Menu Return to the EXTEND-BOOTWARE menu. 2. Enter 3 in the Ethernet submenu to configure file transfer settings. Enter your choice(0-3):3 ETHERNET PARAMETER SET |Note: '.' = Clear field. | | '-' = Go to previous field. | | Ctrl+D = Quit. | Protocol (FTP or TFTP) :tftp Load File Name :test.bin : Target File Name :test.bin : Server IP Address :192.168.0.23 Local IP Address :192.168.0.93 Gateway IP Address :0.0.0.0 Table 13 Setting file transfer parameters Field '.' = Clear field '-' = Go to previous field Ctrl+D = Quit Protocol (FTP or TFTP) Load File Name Target File Name Server IP Address Local IP Address Description Press the dot (.), and then press Enter to clear the setting for a field. Press the hyphen (-), and then press Enter to return to the previous field. Press Ctrl + D to exit the Ethernet parameter settings menu. Set the file transfer protocol to FTP or TFTP. Set the name of the file to be downloaded. Set a file name for saving the file in the current storage medium on the device. The target file name must have the same suffix as the source file. By default, the target file name is the same as the source file name. Set the IP address of the FTP or TFTP server. If a mask must be set, use a colon (:) to separate the mask length from the IP address. For example, 192.168.2.26:24. Set the IP address of the device. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
29
Table 12 Ethernet submenu options
Option
Tasks
<1> Download Application Program To SDRAM
And Run
Load and run a system software image in SDRAM.
If password recovery capability is disabled, this option is
not available.
<2> Update Main Application File
Download a system software image to the current storage
medium as the main image (the file attribute is set to M).
If a main system image already exists, the M file attribute of
the original image is removed.
<3> Modify Ethernet Parameter
Configure FTP or TFTP file transfer settings.
<0> Exit To Main Menu
Return to the EXTEND-BOOTWARE menu.
2.
Enter
3
in the Ethernet submenu to configure file transfer settings.
Enter your choice(0-3):3
=================================<ETHERNET PARAMETER SET>===================
|Note:
'.' = Clear field.
|
|
'-' = Go to previous field.
|
|
Ctrl+D = Quit.
|
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name
:test.bin
:
Target File Name
:test.bin
:
Server IP Address
:192.168.0.23
Local IP Address
:192.168.0.93
Gateway IP Address
:0.0.0.0
Table 13 Setting file transfer parameters
Field
Description
'.' = Clear field
Press the dot (.), and then press
Enter
to clear the setting for a field.
'-' = Go to previous field
Press the hyphen (-), and then press
Enter
to return to the previous field.
Ctrl+D = Quit
Press
Ctrl
+
D
to exit the Ethernet parameter settings menu.
Protocol (FTP or TFTP)
Set the file transfer protocol to FTP or TFTP.
Load File Name
Set the name of the file to be downloaded.
Target File Name
Set a file name for saving the file in the current storage medium on the
device. The target file name must have the same suffix as the source
file.
By default, the target file name is the same as the source file name.
Server IP Address
Set the IP address of the FTP or TFTP server. If a mask must be set, use
a colon (:) to separate the mask length from the IP address. For
example, 192.168.2.26:24.
Local IP Address
Set the IP address of the device.