HP 6125G HP 6125-CMW520-R2106 Release Notes - Page 43
Description, Field
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Item Update Main Application File Modify Ethernet Parameter Exit To Main Menu Description Upgrade the main system software image. Modify network settings. Return to the BootWare menu. 5. Enter 5 to configure the network settings. ETHERNET PARAMETER SET |Note: '.' = Clear field. | | '-' = Go to previous field. | | Ctrl+D = Quit. | Protocol (FTP or TFTP):tftp Load File Name :test.bin :main.bin Target File Name :test.bin :main.bin Server IP Address :192.168.80.22 Local IP Address :192.168.80.10 Gateway IP Address :0.0.0.0 Table 19 Network parameter fields and shortcut keys Field '.' = Clear field '-' = Go to previous field Ctrl+D = Quit Protocol (FTP or TFTP) Load File Name Target File Name Server IP Address Local IP Address Gateway IP Address Description Press a dot (.) and then Enter to clear the setting for a field. Press a hyphen (-) and then Enter to return to the previous field. Press Ctrl + D to exit the Ethernet Parameter Set menu. Set the file transfer protocol to FTP or TFTP. Set the name of the file to be downloaded. Set a file name for saving the file on the switch. By default, the target file name is the same as the source file name. Set the IP address of the FTP or TFTP server. If a mask must be set, use a colon (:) to separate the mask length from the IP address. For example, 192.168.80.10:24. Set the IP address of the switch. Set a gateway IP address if the switch is on a different network than the server. 6. Select an option in the Ethernet submenu to upgrade a system software image. For example, enter 2 to upgrade the main system software image. Loading...Done! 17911744 bytes downloaded! Updating File flash:/main.bin Done Enter Ethernet SubMenu 39