HP 6125G HP 6125-CMW520-R2106 Release Notes - Page 28
Ctrl + B, Enter, Option, Tasks, Reference - default password
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
1. Reboot the device or run the primary or backup extended BootWare segment from the BASIC-BOOTWARE menu. 2. Press Ctrl + B within five seconds after the "Press Ctrl+B to enter extended boot menu..." prompt message appears. If you fail to do this, the system starts decompressing the system software. BootWare password: Not required. Please press Enter to continue. 3. Press Enter at the prompt for password. The EXTEND-BOOTWARE menu appears. Password recovery capability is enabled. Note: The current operating device is flash Enter < Storage Device Operation > to select device. EXTEND-BOOTWARE MENU | Boot System | | Enter Serial SubMenu | | Enter Ethernet SubMenu | | File Control | | Restore to Factory Default Configuration | | Skip Current System Configuration | | BootWare Operation Menu | | Clear Super Password | | Storage Device Operation | | Reboot | Ctrl+Z: Access EXTEND-ASSISTANT MENU Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): Availability of some options in this menu depends on the password recovery capability state (displayed on top of the EXTEND-BOOTWARE menu). For more information about the feature, see "Disabling password recovery capability." Table 10 EXTEND-BOOTWARE menu options Option Boot System Tasks Reference Run the system software without rebooting the device. Choose this option after completing operations in the EXTEND-BOOTWARE menu. N/A 24