HP 6125G HP 6125-CMW520-R2106 Release Notes - Page 45
Field, Description
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
| Ctrl+D = Quit. | Protocol (FTP or TFTP):ftp Load File Name :test.bin :main.bin Target File Name :test.bin :main.bin Server IP Address :192.168.80.20 Local IP Address :192.168.80.10 Gateway IP Address :0.0.0.0 FTP User Name :UserN FTP User Password :PWD Table 21 Network parameter fields and shortcut keys Field '.' = Clear field '-' = Go to previous field Ctrl+D = Quit Protocol (FTP or TFTP) Load File Name Target File Name Server IP Address Local IP Address Gateway IP Address FTP User Name FTP User Password Description Press a dot (.) and then Enter to clear the setting for a field. Press a hyphen (-) and then Enter to return to the previous field. Press Ctrl + D to exit the Ethernet Parameter Set menu. Set the file transfer protocol to FTP or TFTP. Set the name of the file to be downloaded. Set a file name for saving the file on the switch. By default, the target file name is the same as the source file name. Set the IP address of the FTP or TFTP server. If a mask must be set, use a colon (:) to separate the mask length from the IP address. For example, 192.168.80.10:24. Set the IP address of the switch. Set a gateway IP address if the switch is on a different network than the server. Set the username for accessing the FTP server. This username must be the same as configured on the FTP server. This field is not available for TFTP. Set the password for accessing the FTP server. This password must be the same as configured on the FTP server. This field is not available for TFTP. 6. Select an option in the Ethernet submenu to upgrade a system software image. For example, enter 2 to upgrade the main system software image. Loading Done! 17911744 bytes downloaded! Updating File flash:/main.bin Done! Enter Ethernet SubMenu |Note:the operating device is flash | | Download Application Program To SDRAM And Run | 41