HP 6125G HP 6125-CMW520-R2106 Release Notes - Page 30
Running the system software
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Option Tasks Reference Skip Current System Configuration Start the device with the factory-default configuration without loading any configuration file. This is a one-time operation and takes effect only for the first system boot or reboot after you choose this option. If password recovery capability is disabled, this option is not available. Starting up without loading the configuration file BootWare Operation Menu Back up, recover, and upgrade the BootWare image. Managing the BootWare image Clear Super Password Start the system with the next-startup configuration file with all user privilege passwords configured with the super password command ignored. Clearing all user privilege passwords Storage Device Operation Set the storage medium from which the device will start up. Set the storage medium where file operations are performed. This storage medium is referred to as the "current storage medium" in this chapter. Managing storage media Reboot Reboot the device. N/A Running the system software To run the system software after completing all operations, enter 1 in the EXTEND-BOOTWARE menu. Starting to get the main application file--flash:/blade.bin!...The main application file is self-decompressing...Done! System application is starting... User interface aux0 is available. Press ENTER to get started. 26