HP 6400/8400 HP StorageWorks Enterprise Virtual Array Updating Product Softwar - Page 76
No storage systems found, Symptom, Cause of the error, Corrective action
View all HP 6400/8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
No storage systems found Symptom HP Command View EVA does not display any storage systems, even though they are on the fabric. Cause of the error Several conditions can cause this symptom. Table 9 lists some possible causes of these errors and their corrective actions. Corrective action Table 9 Possible causes and corrective actions when no storage system found Possible Cause Corrective Action The management server may not be able to communicate with either controller. Check the connection configuration between the management server and the controller pair. The management server must have a communication path to both controllers in case one controller loses communications with the server. When HP Command View EVA is first starting up, a password may be enabled on the controllers, but a password has not been entered in HP Command View EVA. Enter the correct password through HP Command View EVA or disable the password on the controller. The switches may not be correctly zoned, making a storage system invisible to HP Command View EVA. Verify that switches are zoned correctly. HP Command View EVA may have been re- 1. Verify that the controllers are up and functioning properly. started while there was a communication 2. Check the cable connections between the management server and failure between HP Command View EVA and the switch. the controllers. When restart is completed, the storage system that lost communication 3. Verify that switch zoning is correct. will not be visible. 4. Click Discover. A storage system may not be visible to HP Command View EVA because the controllers are waiting for World Wide ID (WWID) to be entered. This condition will occur if the storage system has been uninitialized and the cabinet is power cycled. This may also occur if backend problems are preventing access to the quorum drives. Once communication is restored, the WWID along with the checksum can be re-entered. Enter the WWID. Solving security credentials configuration problems The following Windows-based security groups are required on the management server: 76 Troubleshooting