HP 8/80 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 378

42 FW-1133 Probable Cause Indicates that the number of zone changes has changed from a value outside of the acceptable range to a value within the acceptable range. Zone changes occur when there is a change to the effective zone configuration. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1133 Message , [FW-1133], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of fabric logins has changed. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login or FLOGI. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1134 Message , [FW-1134], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of fabric logins has fallen below the low boundary. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login or FLOGI. A low number of fabric logins means that the fabric is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1135 Message , [FW-1135], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of fabric logins has risen above the high boundary. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login or FLOGI. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO 302 Fabric OS Message Reference 53-1001767-01