HP 8/80 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 385

42 FW-1174 Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1174 Message , [FW-1174], ,, WARNING, , , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of protocol errors that the port experiences has risen above the high boundary. Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to hardware problems. Recommended Check both ends of your connection. Verify that your cable and small form-factor pluggable (SFP) Action are not faulty. Severity WARNING FW-1175 Message , [FW-1175], ,, INFO, , , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of protocol errors that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to hardware problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1176 Message , [FW-1176], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of invalid words that the port experiences has changed. Invalid words usually indicate a hardware problem with an small form-factor pluggable (SFP) or cable. Recommended Check both ends of your connections, your SFP, and your cable to verify that none are faulty. Action Severity INFO Fabric OS Message Reference 309 53-1001767-01