HP 8/80 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 391

42 FW-1194 Severity INFO FW-1194 Message , [FW-1194], ,, WARNING, , , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of state changes that the port experiences has risen above the high boundary. The state of the port has changed for one of the following reasons: the port has gone offline, has come online, is testing, is faulty, has become an E_Port, has become an F_Port, has segmented, or has become a trunk port. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity WARNING FW-1195 Message , [FW-1195], ,, INFO, , , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of state changes that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. The state of the port has changed for one of the following reasons: the port has gone offline, has come online, is testing, is faulty, has become an E_Port, has become an F_Port, has segmented, or has become a trunk port. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1196 Message , [FW-1196], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of link resets that the port experiences has changed. Link resets occur due to link timeout errors that indicate no frame activity at all. Recommended Check both ends of your cable connection. Verify if the cable and small form-factor pluggables Action (SFPs) are faulty. Severity INFO Fabric OS Message Reference 315 53-1001767-01