HP 8/80 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 383

42 FW-1167 FW-1167 Message , [FW-1167], ,, INFO, , , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of synchronization losses that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Loss of synchronization errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable. Signal losses often create synchronization losses. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1168 Message , [FW-1168], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of signal losses that the port experiences has changed. Loss of signal generally indicates a physical problem. Recommended Check both ends of your cable connection. Verify that the cable and small form-factor pluggables Action (SFPs) are not faulty. Severity INFO FW-1169 Message , [FW-1169], ,, INFO, , , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of signal losses that the port experiences has fallen below the low boundary. Loss of signal generally indicates a physical problem. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. A low number of signal loss errors means that the switch is functioning normally. Severity INFO FW-1170 Message , [FW-1170], ,, WARNING, , , , is above high boundary(High=, Low=). Current value is . Fabric OS Message Reference 307 53-1001767-01