HP 8/80 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 624

90 SEC-1253 Probable Cause Indicates the security database conversion failed because of invalid values. The reason is specified in the text message variable and a faulty value is printed in the value variable. Recommended Action Retry the failed security command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1253 Message , [SEC-1253], ,, ERROR, , Bad DCC interface state during , state=. Probable Cause Indicates an internal error has caused the device connection control (DCC) policy update to fail in the provision, commit, or cancel phases. Recommended Action Retry the failed security command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1300 Message , [SEC-1300], ,, INFO, , This switch is in VcEncode mode. Security is not supported. Probable Cause Indicates the switch is set up with VC-encoded mode. Recommended Turn off VC-encoded mode before enabling security. Action Severity INFO SEC-1301 Message , [SEC-1301], ,, INFO, , This switch is in interop mode. Security is not supported. Probable Cause Indicates the switch is interop-mode enabled. Recommended Disable interop-mode using the interopMode command before enabling the Secure Fabric OS Action feature. Severity INFO 548 Fabric OS Message Reference 53-1001767-01