HP 8/80 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 605

90 SEC-1115 SEC-1115 Message , [SEC-1115], ,, ERROR, , No primary FCS to failover. Probable Cause Indicates that during an attempted secFcsFailover, no primary fabric configurations server (FCS) is present in the fabric. Recommended Run the secFabricShow command to verify that all switches in fabric are in the ready state. When Action all switches are in the ready state, retry the operation. Severity ERROR SEC-1116 Message , [SEC-1116], ,, ERROR, , Fail to commit failover. Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1117 Message , [SEC-1117], ,, INFO, , Fail to set . Probable Cause Indicates the switch failed to save the data received by the primary fabric configuration server (FCS) switch. This data can be an FCS password, a non-FCS password, SNMP data, or multiple user authentication data. Recommended Run the secFabricShow command to verify that all switches in the fabric are in the ready state. Action When all switches are in the ready state, retry the operation. Severity INFO SEC-1118 Message Probable Cause , [SEC-1118], ,, INFO, , Fail to set SNMP string. Indicates the SNMP string could not be set. Fabric OS Message Reference 529 53-1001767-01