HP AP775A Cisco Nexus 5000 Series Command Reference, Release 4.1(3)N1(1) (OL-1 - Page 305
pinning max-links
UPC - 884962062708
View all HP AP775A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 305 highlights
Chapter 4 Fabric Extender Commands pinning max-links Send comments to [email protected] pinning max-links To specify the number of statically pinned uplinks, use the pinning max-links command. To reset to the default, use the no form of this command. pinning max-links uplinks no pinning max-links Syntax Description uplinks Number of uplinks. The range is 1 to 4. The default is 1. This command is applicable only if the Fabric Extender is connected to its parent switch using one or more statically pinned fabric interfaces. Command Default The maximum uplinks is 1. Command Modes Fabric Extender configuration mode Command History Release 4.0(1a)N2(1) Modification This command was introduced. Usage Guidelines Use the pinning max-links command when you create a number of pinned fabric interface connections to enable the parent switch to determine a distribution of host interfaces. The host interfaces are divided by the number of uplinks and distributed accordingly. Caution Changing the value of uplinks is disruptive; all the host interfaces on the Fabric Extender are brought down and back up as the parent switch reassigns its static pinning. Examples This example shows how to specify the number of statically pinned uplinks for a Fabric Extender: switch# configure terminal switch(config)# fex 101 switch(config-fex)# pinning max-links 4 This example shows how to revert to the uplink count to the default for a Fabric Extender: switch# configure terminal switch(config)# fex 101 switch(config-fex)# no pinning max-links OL-16599-01 Cisco Nexus 5000 Series Command Reference 4-9