HP AP775A Cisco Nexus 5000 Series Command Reference, Release 4.1(3)N1(1) (OL-1 - Page 57

Chapter 1 Basic System Commands end Send comments to [email protected] end To end the current configuration session and return to EXEC mode, use the end command in configuration mode. end Syntax Description This command has no arguments or keywords. Command Default None Command Modes Configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines This command returns you to EXEC mode regardless of which configuration mode you are in. Use this command when you are done configuring the system and you want to return to EXEC mode to perform verification steps. Examples In the following example, the end command is used to exit from interface configuration mode and return to EXEC mode. A show command is used to verify the configuration. switch# configure terminal switch(config)# interface ethernet 1/1 switch(config-if)# switchport host switch(config-if)# end switch# show interface ethernet 1/1 Related Commands Command exit (EXEC) exit (global) Description Terminates the active terminal session by logging off the router. Exits from the current configuration mode. OL-16599-01 Cisco Nexus 5000 Series Command Reference 1-33