HP AP775A Cisco Nexus 5000 Series Command Reference, Release 4.1(3)N1(1) (OL-1 - Page 573

Chapter 8 Fibre Channel Commands clear zone Send comments to [email protected] clear zone To clear all configured information in the zone server for a specified VSAN, use the clear zone command. clear zone {database | lock | statistics} vsan vsan-id Syntax Description database lock statistics vsan vsan-id Clears zone server database information. Clears a zone server database lock. Clears zone server statistics. Clears zone information for a VSAN. The ID of the VSAN is from 1 to 4093. Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines After entering a clear zone database command, you need to explicitly enter the copy running-config startup-config to ensure that the running configuration is used when you next start the switch. When you enter the clear zone lock command from a remote switch, only the lock on that remote switch is cleared. When you enter the clear zone lock command from the switch where the lock originated, all locks in the VSAN are cleared. The recommended method to clear a session lock on a switch where the lock originated is by entering the no zone commit vsan command. Examples The following example shows how to clear all configured information in the zone server for VSAN 1: switch# clear zone database vsan 1 Related Commands Command show zone Description Displays zone information for any configured interface. OL-16599-01 Cisco Nexus 5000 Series Command Reference 8-25