HP AP775A Cisco Nexus 5000 Series Command Reference, Release 4.1(3)N1(1) (OL-1 - Page 770
show vpc brief, Cisco Nexus 5000 Series Command Reference, OL-16599-01, Vpc Commands
UPC - 884962062708
View all HP AP775A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 770 highlights
show vpc brief Chapter 10 Vpc Commands Send comments to [email protected] show vpc brief To display brief information about the virtual port channels (vPCs), use the show vpc brief command. show vpc brief [vpc number] Syntax Description vpc number (Optional) Displays the brief information for the specified vPC. The range is from 1 to 4096. Defaults None Command Modes Any command mode. Command History Release 4.1(3)N1(1) Modification This command was introduced. Usage Guidelines The show vpc brief command displays the vPC domain ID, the peer-link status, the keepalive message status, whether the configuration consistency is successful, and whether peer-link formed or the failure to form. This command is not available if you have not enabled the vPC feature. See feature vpc for information on enabling vPCs. You can display the track object, if you have configured a tracked object for running vPCs on a single module under the vpc-domain configuration mode. This command does not require a license. Examples This example shows how to display brief information about the vPCs: switch(config)# show vpc brief Legend: (*) - local vpc is down, forwarding via vPC peer-link vPC domain id : 10 Peer status : peer adjacency formed ok vPC keep-alive status : peer is alive Configuration consistency status: success vPC role : primary Number of vPC configured : 1 vPC Peer-link status id Port Status Active vlans 1 Po10 up 1-100 vPC status 10-6 Cisco Nexus 5000 Series Command Reference OL-16599-01